The top surface of the ton barrel is washed with a high-pressure water cleaner. When the high-pressure water mechanism moves left and right through the XY coordinates, the swinging mechanism drives the nozzle to swing, achieving a large attack range and effective close-range attack. During the washing process, the ton barrel moves forward at the conveying speed, and the high-pressure water mechanism swings left and right on the clean water rack at a set speed, effectively impacting the barrel, adjusting the speed as required.

　　Achieve a no-dead-angle cleaning operation for ton barrels, completing the cleaning operation without dead angles through devices such as the device, contraction positioning mechanism, and steam heating, finishing the processes of traditional manual cleaning, high labor intensity for workers, time-consuming and labor-intensive, low cleaning efficiency, and inadequate cleaning, including the transportation, recovery of residual liquid, internal cleaning, external cleaning, rinsing, and water absorption control.

　　Of course, we cannot forget the cleaning and granulation solutions for chemical barrels. For various common plastic containers, such as plastic bottles, plastic cups, chemical barrels, and oil tanks, their recycling and processing cannot be more friendly! Familiar users praise the two solutions for their plastic films and plastic containers. They cover a wide range and have good applicability, achieving one solution for one type of plastic.

　　Look at what treasure version plan I have dug for you, isn't it to get to know each other?

　　Cleaning and granulation plan for chemical barrels.

　　White pollution is a common environmental issue. The water environment, soil environment, ecological health, and life health problems caused by plastic pollution have attracted widespread attention from the country and society, especially regarding disposable plastic products. The international community even shouts slogans for rapid decision-making on plastics, but eliminating plastic pollution remains a huge project that needs to be continuously addressed.

　　In addition, due to the universality and convenience of plastic products themselves, source alternatives will not become applicable solutions at present, which also makes the industry pay more attention to recycling. Currently, the recognized effective and convenient recycling solution for plastic packaging containers is the granulation solution, but the processes of crushing, cleaning, drying, dewatering, and granulating are very delicate.

　　The chemical barrel cleaning line is suitable for various hard plastic waste, including HDPE, PP, ABS, etc., and can handle various plastic waste with different pollution levels, with intelligent control and automatic production.

　　Unlike the plastic film cleaning and granulation solution, a crusher is used according to the characteristics of the chemical barrel, rather than a double-roller crusher. To better suit waste with higher pollution levels, such as hazardous waste barrels, this chemical barrel cleaning line is divided into two paths: hot washing machines and friction cleaning machines.

　　The hot washing machine will cook the impurities of the plastic in containers containing hot alkali, allowing the bottles to rub against each other under the drive of the stirring shaft, promoting the separation of impurities from the plastic, and then transporting them to the friction cleaning machine through a vertical dewatering machine. The separation sedimentation tank, vertical dewatering machine, crusher, and granulation system enter together with ordinary cleaning barrel materials.