Specification Table Number:

CJ25L-41/B

Release Date:

2020.5

Description:

25L Closed Plastic Drum (Dongshuo)

Product Specification Model:

25L

Drawing Number:

CJ25L-41/B

Note:

^*  Please confirm the chemical compatibility of the contents with the packaging container. Other sealing materials are available for selection. The filling temperature should not exceed 60℃. If hot filling, please cool the contents to room temperature before tightening the drum lid.

Avoid exposure to sunlight, store in a ventilated and cool place, and avoid collision with sharp objects.

Drum

Structure:

Closed Plastic Drum

Nominal/Full Capacity (L):

25

>=26.5

Approved Weight (kg):

>=1.38

Minimum Wall Thickness (mm):

1.1

Filling Diameter (mm):

46±0.3

Thread Diameter

60±1

Symmetrical Wall Thickness Ratio:

<=1.3:1

Material:

High-Density Polyethylene

Manufacturing Method:

Extrusion Blow Molding

Color:

Blue

Outer Lid

Material:

HDPE

Color:

Blue

Height (mm):

32±0.5

Outer Diameter (mm)

73±0.5

Thread Diameter (mm):

60±0.5

Weight (g):

24±2

Wall Thickness: mm

>=2.0

Sealing Ring

Material:

EVA

Color:

White

Thickness (mm):

4±0.5

Inner Diameter (mm)

44.5±0.2

Weight (g):

2±1

Physical and Mechanical Properties

Stacking Test:

Inject nominal capacity of water stacked 3 high at room temperature for 48 hours without collapse.

Drop Test:

Inject nominal capacity of water dropped from 1.6 meters impacting the bottom 3 times without damage.

Sealing Test:

Inject nominal capacity of water, tighten the lid, and lay it on the ground for 4 hours without leakage.

Air Tightness Test:

Constant pressure of 20kpa for 5 minutes without bubble generation.

Hydraulic Test:

Constant pressure of 100kpa for 30 minutes without leakage.

Materials:

Qatar 50100, CNOOC Shell 5421B

Others

Specification Table Number:

CJ25L-57/B

Release Date:

2020.5

Description:

25L Closed Plastic Drum (Reinforced)

Product Specification Model:

25L

Drawing Number:

CJ25L-57/B

Note:

^*  Please confirm the chemical compatibility of the contents with the packaging container. Other sealing materials are available for selection. The filling temperature should not exceed 60℃. If hot filling, please cool the contents to room temperature before tightening the drum lid.

Avoid exposure to sunlight, store in a ventilated and cool place, and avoid collision with sharp objects.

Drum

Structure:

Closed Plastic Drum

Nominal/Full Capacity (L):

25

≥27

Approved Weight (kg):

1.3±0.02

Minimum Wall Thickness (mm):

1.1

Filling Diameter (mm):

46±0.3

Thread Diameter

60±1

Symmetrical Wall Thickness Ratio:

<=1.3:1

Material:

High-Density Polyethylene

Manufacturing Method:

Extrusion Blow Molding

Color:

Blue

Outer Lid

Material:

HDPE

Color:

Blue

Height (mm):

32±0.5

Outer Diameter (mm)

73±0.5

Thread Diameter (mm):

60±0.5

Weight (g):

25±2

Wall Thickness: mm

>=2.0

Inner Lid

Material:

HDPE

Color:

White

Height (mm):

17±0.5

Inner Diameter (mm)

46.5±0.5

Wall Thickness:

>=1.0

Weight (g):

8±1

Physical and Mechanical Properties

Stacking Test:

Inject nominal capacity of water stacked 3 high at room temperature for 48 hours without collapse.

Drop Test:

Inject nominal capacity of water dropped from 1.8 meters impacting the bottom 3 times without damage.

Sealing Test:

Injecting the nominal capacity of water and tightening the cap, placed horizontally on the ground for 4 hours without leakage.

Air Tightness Test:

Constant pressure of 20kpa for 5 minutes without bubble generation.

Hydraulic Test:

Constant pressure of 100kpa for 30 minutes without leakage.

Materials:

Qatar 50100, CNOOC Shell 5421B

Others