Specification Sheet No.:

60L-10/B3       

Release Date:

2020.5

Product Description:

60L Double-Mouth Plastic Container

Product Model/Specification:

60L Double-Mouth Drum

Drawing No.:

CJ60L10/B3

Note:

Please confirm the chemical compatibility of the contents with the packaging container. Other sealing materials are available for selection. Filling temperature should not exceed 60℃. For hot filling, please cool the contents to room temperature before tightening the cap.

This product is manufactured using high-density polyethylene produced by Sinopec, featuring strong acid and alkali resistance.

Avoid direct sunlight, store in a cool and ventilated place, and strictly prohibit collision with sharp objects.

Drum

Structure:

Double-Mouth Plastic Container

Nominal/Full Capacity (L):

60

≥64

Rated Weight (kg):

3.5±0.05

Minimum Wall Thickness (mm):

1.8

Filling Port Diameter (mm):

80±1

59±1

Symmetry Wall Thickness Ratio:

1.3：1

Material:

High-Density Polyethylene

Manufacturing Method:

Extrusion Blow Molding

Color:

Blue

Thread Type:

BCS70×6

Cap

Material:

HDPE

Sealing Material:

EVA

Seal Type:

O-ring (Circular Cross-section)

Thread Type:

BCS70×6

Torque (EVA/Rubber):

22/25  N·m

Vent Device (Optional):

Two-way breathable membrane (Gore, USA), domestic

Small Cap Thread Diameter (mm):

55.5±0.2

Large Cap Thread Diameter (mm):

75±0.2

Physical and Mechanical Properties

Drop Test:

-18℃, 1.6m, no rupture, no leakage

Stacking Test:

40℃, 3m, maintained for 28 days: No collapse, no leakage.

Airtightness Test:

Constant air pressure ≥20Pa for 5min: No leakage

Hydraulic Test:

Constant water pressure ≥100 for 30min: No damage, no leakage

Specification Sheet No.:

60LA-10/B2

Release Date:

2020.5

Product Description:

60L Double-Mouth Plastic Container

Product Model/Specification:

60L Double-Mouth (Heavy-Duty)

Drawing No.:

CJ60LA-10/B2  

Note:

Please confirm the chemical compatibility of the contents with the packaging container. Other sealing materials are available for selection. Filling temperature should not exceed 60℃. For hot filling, please cool the contents to room temperature before tightening the cap.

This product is manufactured using high-density polyethylene produced by Sinopec, featuring strong acid and alkali resistance.

Avoid direct sunlight, store in a cool and ventilated place, and strictly prohibit collision with sharp objects.

Drum

Structure:

Double-Mouth Plastic Container

Nominal/Full Capacity (L):

60

≥64

Rated Weight (kg):

3.5±0.1

Minimum Wall Thickness (mm):

1.8

Filling Port Diameter (mm):

80±1

59±1

Symmetry Wall Thickness Ratio:

1.3：1

Material:

High-Density Polyethylene

Manufacturing Method:

Extrusion Blow Molding

Color:

White

Thread Type:

BCS70×6

Cap

Material:

HDPE

Sealing Material:

EVA

Seal Type:

O-ring (Circular Cross-section)

Thread Type:

BCS70×6

Torque (EVA/Rubber):

22/25  N·m

Vent Device (Optional):

Two-way breathable membrane (Gore, USA), domestic

Small Cap Thread Diameter (mm):

55.5±0.2

Large Cap Thread Diameter (mm):

75±0.2

Physical and Mechanical Properties

Drop Test:

At room temperature, filled with water, 1.5m drop: no rupture, no leakage.

Stacking Test:

At room temperature, stacked 3 drums high, filled with water: No collapse after 48 days.

Airtightness Test:

Constant air pressure ≥20Pa for 5min: No leakage

Hydraulic Test:

Constant water pressure ≥100 for 30min: No damage, no leakage