How to cleanChemical druminside the moss?

1. Main reasons for moss formation:

1. Water quality varies by location, and the production of moss is closely related to water quality.

2. It is closely related to the quality of the chemical drum, and it is recommended to purchase chemical drums with guaranteed quality.

3. Try not to let water stay in the chemical drum for too long, forming stagnant water, which is prone to moss growth.

2. Due to various reasons, moss can easily form inside chemical drums, which is unsanitary and difficult to clean. The following methods can effectively remove moss from chemical drums:

1. If it is just a simple cleaning without special requirements, soaking in hot water for a while and rinsing a few times can remove it.

2. Appropriate industrial banana oil can be used to remove moss. After the smell of banana oil evaporates, it can be cleaned with hot water, disinfected with alcohol, and left for a while.

Chemical drumSome common knowledge about leaks

The production process of chemical drums is lightweight and environmentally friendly. The liquids or solids stored in chemical drums usually have strong acid and alkali resistance. Once a leak occurs, the consequences cannot be underestimated. Therefore, we should have some common knowledge about chemical drum leaks.

① Testing

There are usually several detection methods: instrument detection, test tube detection, and simultaneous detection with instruments and test tubes.

② Caution

Warning areas should be set up according to the different types of hazardous chemicals, and different warning signs should be established. Entrances and exits, parking areas, equipment and material placement areas, decontamination testing areas, clothing registration areas, etc. should be set up in appropriate positions around the warning area.

③ Measures for handling accidents

For different chemical disasters, the main disposal measures include: closing valves, blocking, replacing, recycling, sampling, etc. When someone is trapped or needs to be evacuated, treatment should be carried out simultaneously. The idea of saving people.

④ Decontamination

Purification mainly involves cleaning the operators and equipment in the safe area to eliminate the harm of harmful chemicals to the human body and equipment. Purification must be carried out in purification or decontamination tents set up at the exit. Residual liquid should be recycled to avoid secondary pollution. Repeat the decontamination process until tests confirm no contamination.

Its main purpose is to harmlessly treat hazardous chemicals recovered by the environmental protection department through transfer vehicles.

Chemical drumCommon knowledge for safe use

Chemical drums have good heat and cold resistance, hardness, tensile strength, electrical insulation, and toughness, with good chemical stability. They are almost insoluble in any organic solvent at room temperature, resistant to corrosion from various acids, bases, and salt solutions, and have excellent resistance to environmental stress cracking and thermal stress cracking, high surface hardness, and good size stability. Chemical drums are convenient to use, economical, and durable. With the development of internationalization, plastic drums have gradually become the main product for liquid packaging. They can hold Class II and III hazardous materials, with Class II hazardous liquid density of 1.5g/cm3 and Class III hazardous liquid density of 1.8g/cm3. The product structure is reasonable and durable, can be directly loaded and unloaded with a forklift, and can be stacked for storage.

Although chemical drums are indispensable products used to hold many things in our lives, safety and health, and correct use are worth our attention.