The price of the ton barrels we purchase is not low, and such products are needed every day, so we must pay special attention to basic maintenance work. Although it is not necessary to wipe them every day, they must be used correctly. So how can we extend the usage time of such products?

1. Purchase quality products

In fact, regardless of the industry we are engaged in, since we need to use ton barrels, we should ensure their quality. It is best to cooperate with reputable ton barrel manufacturers to obtain products with qualification certificates. This way, we do not have to worry about quality, and the manufacturers will provide us with different models, making it much easier to choose without too much hesitation.

2. Avoid bumps during daily use

Since ton barrels are generally made of plastic, they have good corrosion resistance and anti-degradation properties, but they are not resistant to bumps. Especially when subjected to external force, they may leave marks or even suffer damage. Therefore, if we want to avoid problems with the ton barrels, we must be careful during daily use, and there should not be any sharp objects around the area to avoid any impact.

3. Conduct regular inspection work

We should also perform a simple inspection of the ton barrels regularly, such as a complete maintenance every week. A simple wipe can help us determine if the ton barrel is damaged or needs repair, etc. Only by doing the basic daily work well can we extend the usage time of our products, which also helps us save a lot of costs.

The 200L plastic barrel is a common transportation product, and over time, it is inevitable that some minor issues will arise, such as wear or cracks. If not handled properly, it can lead to product damage.

If the 200L plastic barrel we need to repair is made of polyethylene, we can use plastic welding or an electric soldering iron for hot welding and bonding. The working principle of the 200L plastic barrel is that after the circuits are connected, the air compressor continuously sucks in air and compresses it into high-pressure gas; the heating wire in the plastic welder is heated to a very high temperature. By opening the exhaust valve of the air compressor, the high-pressure gas is heated as it passes through the holes in the heating wire of the plastic welder, and then it is ejected from the nozzle as a high-pressure hot air stream that melts the plastic, causing the plastic molecules of the two surfaces to diffuse and penetrate each other. After cooling, the interface disappears, and they bond into one.

The voltage of the plastic welding gun can be adjusted through the performance of the pressure regulator to control the temperature. Generally speaking, at room temperature (20-25°C), if the voltage is set to around 120V, the temperature of the high-pressure hot air stream can be maintained at around 174°C, which meets the temperature requirements for welding polyethylene 200L plastic barrels.

Of course, some plastic barrels are very difficult to repair once damaged, and due to the special substances they contain, they are also difficult to recycle and process again. If disposed of by burial, they are hard to degrade and can pollute the soil; if incinerated, they produce many harmful gases that can affect our health, and the gas pollution is difficult to clean. Therefore, we advocate for special treatment of plastic barrels before secondary processing to reduce environmental pollution.

I believe that through the above introduction, everyone has understood the methods for dealing with damaged plastic barrels during use and can practice them in daily life to reduce resource waste.

200L plastic barrels are ubiquitous in daily life. The inner liner of the 200-liter plastic barrel is usually made of high molecular polyethylene blow molding, which has high hardness and strength. Additionally, this product has good toughness, allowing it to be cleaned and reused, reducing production costs. To ensure that the product quality is not compromised, the following introduces the precautions for cleaning plastic barrels.

200-liter plastic barrels have the characteristics of being non-greasy and easy to clean, making the cleaning process relatively simple. There are mainly two types of cleaning: manual cleaning and machine cleaning. Manual cleaning can ensure the effectiveness of cleaning but consumes more time and effort. Machine cleaning can not only improve work efficiency but also enhance cleaning quality.

In summary, the 200-liter plastic barrel has many characteristics that can meet demands. To ensure that the product quality is not compromised, standardized operations should be followed during cleaning, and appropriate cleaning methods should be chosen to ensure quality while improving the plastic's durability, thus extending its service life.

The 200L plastic barrel is not only visually appealing but also very useful, and it is used in many projects. Since the material is plastic, although it is somewhat large, it is not heavy, making it convenient for transportation and storage. This not only saves labor but also conserves space. It is highly resistant to cold and corrosion, suitable for use in many environments.

Although the 200L plastic barrel has many advantages, it is important to pay attention to the usage methods. While it is used for holding items, not everything can be stored in it. For example, dangerous goods such as sulfuric acid, gasoline, and toluene cannot be stored in it, as it can easily lead to explosions. Some barrels are specifically designed for storing chemicals and are not suitable for storing consumable water or oil. Detailed consultation should be conducted before purchasing.

How to choose materials for 200L plastic barrels

Plastic barrels need to have a certain degree of transparency. Additionally, due to the requirements of transportation or handling processes, they must have a certain level of wear resistance and impact resistance. Furthermore, in the acid and alkali industry, there are also certain requirements for their corrosion resistance. Therefore, the selection of raw materials for plastic barrels is very important.

Transparent plastics require high light transmittance, which necessitates strict surface quality requirements for plastic products, with no blemishes, air holes, or whitening. Issues such as haze, black spots, discoloration, and poor gloss must be avoided. Therefore, throughout the injection molding process, great attention must be paid to the materials, equipment, molds, and even product design, with strict and even special requirements.

Additionally, since transparent plastics often have high melting points and poor fluidity, adjustments to process parameters such as machine temperature, injection pressure, and injection speed must be made to ensure that the injection material can fill the mold without causing internal stress that leads to product deformation and cracking.

What equipment is needed to produce plastic barrels?

1. Extruder and die head; essentially the same as the equipment for general extrusion-blow molding.

2. Parison handling device; the tubular parison extruded by the extruder must go through this device for cutting, bottom fusion, and neck processing to form a test tube-shaped parison with a bottom.

3. Preform heating device; the preform heating device includes various types such as ovens, heating sleeves, and heating channels. The heating methods can use electric heating or infrared heating. However, the heating device must be able to adjust the temperature and heat evenly, minimizing the temperature difference between the inside and outside of the preform.

4. Stretching device; there are two types: stretching core rod and stretching fixture. Stretching core rod - the stretching core rod is inserted from the upper part of the preform, pressing against the bottom of the preform under hydraulic effect, stopping longitudinal stretching, and then compressed air is introduced through the holes in the core rod to inflate, stopping radial stretching. Most stretching forming uses this type of stretching device. Stretching fixture - the stretching fixture clamps both ends of the tubular preform from the outside, stopping longitudinal stretching under hydraulic effect, and then inflating to stop radial stretching. The neck and bottom both require trimming of flash, which can be recycled after being broken.

5. Extrusion-stretch-blow molding machine.